3340B62 REAR CONNECTION CENTRAL PIPE - R R - Fiat - MULTIPLA - eLearn

2891652 - 3340B62 rear connection central pipe - r r

) Place the car on the ramp.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

- 5530B10 battery - r+r1. Using the special tool, undo the nut securing the rigid pipe to the rear brakes at the ABS control unit.

	Name	Country
-	Spanner	1.856.127.000

Open the pipe retaining bands in the engine compartment.

Raise the car.1. Using the special tool, undo the connector (1a) for the rear brake pipes and release it from the bands (1b) located on the bodyshell. Remove the brake pipe from the vehicle.

	Name	Country
-	Spanner	1.856.127.000

Refitting ( Removing

) Position the rigid brake pipe from the ABS control unit to the rear brake pipe connector.Secure the pipe to the retaining clips present on the bodyshell.Using the special tool, tighten the rigid pipe connector to the rear brake pipes.

	Name	Country
-	Spanner	1.856.127.000

Lower the vehicle.Tighten the nut fixing the rigid pipe to the ABS control unit using the special tool.

	Name	Country
-	Spanner	1.856.127.000

- 5530B10 battery - r+rConnect the battery negative terminal.

	Name	Connector
-	Battery	A1

- 0010T64 brake and or clutch fluid check level and top up as necessary - 0010T65 hydraulic brake system bleed air Remove the car from the ramps.