3340B70 RIGID PIPE (ONE), LEFT OR RIGHT, FROM CONNECTOR TO INTERMEDIATE CABLE - R.R. - Fiat - MULTIPLA - eLearn

2891653 - 3340B70 RIGID PIPE (one), left or right, from connector to intermediate cable - R.R.

) Position the vehicle on the ramp.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

- 4450B11 WHEEL (one) rear - R.R.1. Use the special tool to undo the connector for the rigid rear brake pipes.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

1. Using the special tool, disconnect the rigid brake pipe (1a) from the intermediate flexible pipe connector (1b).

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

Release the rigid pipe retaining clips.Remove the rigid pipe from connector to rear left brake.

Refitting ( Removing

) Position the rigid pipe from the connector to the intermediate flexible pipe on the vehicle.Secure the pipe to the retaining clips.Using the special tool, connect the connector for the rigid pipe to the intermediate flexible pipe.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

Using the special tool, connect the connector for the rigid rear brake pipes.Connect the battery negative terminal.

	Name	Connector
-	Battery	A1

- 0010T64 brake and or clutch fluid check level and top up as necessary - 0010T65 hydraulic brake system bleed air - 4450B11 WHEEL (one) rear - R.R.Remove the vehicle from the lift.