2891935 - 5540C24 MOTOR (ONE) FOR L/H OR R/H HEADLAMP/LIGHT CLUSTER ALIGNMENT CORRECTION - R+R

Removing ( Refitting )     Op. 5550C30 L/H OR R/H FRONT TURN SIGNAL (ONE) - R+R . . 1. Rotate the motor, then extract it gently.2. Release the spherical end (2a) of the motor from the ertainer (2b), lifting it. Refitting ( Removing ) If necessary, check the electrical operation of the motor and check that the control pin travel is regular according to the positions selected.Engage the spherical end of the motor in the headlamp retainer.Fully rotate the motor in its housing.    Op. 5550C30 L/H OR R/H FRONT TURN SIGNAL (ONE) - R+R    Op. 5540B38 HEADLAMP/LIGHT CLUSTER LIGHT BEAM - POSITIONCheck that the motor is working by operating the special switch from the passenger compartment, with the dipped headlamps switched on.