2891174 - 0520G65 ACCELERATOR PEDAL - End of travel adjustment with S.D.C.

Move the accelerator pedal to the end of its travel.Connect an SDC or EXAMINER station to the tester connection and check the throttle valve opening angle.With the pedal at the end of its travel, ensure the throttle valve opening angle is 79°-83° .

	Measurement		Value
-	Throttle vavle opening angle (-)		79° - 83°

If the angle is not within the specified range, adjust the screw under the accelerator pedal.Screw in or out until the correct reading shows on the tester station.

If locking compound (Loktite or similar) is present on the adjustment screw, apply a new layer of locking compound to the screw threads following adjustment.