5020M24 AIR INTAKE HOSE FOR ADDITIONAL INDEPENDENT HEATER - R.R. - Fiat - MULTIPLA - eLearn

2891795 - 5020M24 Air intake HOSE for additional independent heater - R.R.

) Place the vehicle on a lift.Raise the car.1. Using clamps (1a), close the power unit coolant pipes (1b) in the climate control casing inlet/outlet area.

1. Disconnect the electrical connection.

	Name	Connector
1	Additional heater junction	D22

2. Disconnect the fuel pipe.3. Unscrew the nuts.

1. Gently lower the heater.2. Loosen the bands (2a) and disconnect the pipes (2b) from the heater, allowing the liquid to flow into a suitable container.

1. Loosen the band (1a) and extract the hose (1b) releasing it from the retainer (1c).

Refitting ( Removing

) Check that the hose is not damaged.Place the hose in position, attaching it to the retainer, then fasten the connection using the band.Connect the pipes to the heater.Place the heater assembly in position and fasten it using the nuts.Connect the fuel pipe.Connect the electrical connection.Remove the clamps from the power unit coolant pipes in the climate control casing inlet/outlet area. Lower the vehicle and remove it from the lift.Top up the power unit coolant level.Check that the additional heater is working properly.