2891799 - 5020M59 coolant intake hose to supplementary independant heater unit r r with heater unit removed
Removing ( Refitting ) 1. Remove the clamp (1a) from the pipe (1b) and let the power unit coolant flow into a suitable container.
Lower the vehicle and open the bonnet.1. Open the bands (1a) connecting the pipes (1b) to the additional
heater (1c) and to the climate control casing. 2. Loosen the bands (2a) and disconnect the pipe (2b).
1. Raise the vehicle and disconnect the bands (1a), then remove
the heater fluid inlet pipe (1b).
Refitting
(
Removing
)
Check that the heater fluid inlet pipe
is not damaged.Place the heater fluid inlet pipe in position
and connect the bands.Lower the vehicle, connect the pipe and
tighten the band.Fit the bands connecting the pipe to the
additional heater with the pipe to the climate control casing.