Lift the bonnet and
support it in an appropriate manner.1. Slacken the hinge bolts and adjust the bonnet position.The arrows indicate possible movements.2. Tighten the bolts.
1. Adjust buffer blocks if necessary.2. If necessary adjust the catch position. Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR
.
If the adjustments described above are
insufficient, adjust bonnet lid hinge position as described below. Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R
.
3. Slacken the nuts (3a) securing the hinges (3b) and adjust the
position until the bonnet is aligned. Arrows (3c) indicate possible
movements.4. Tighten the nuts.Touch up the paintwork in the hinge area.
