2888407 - K62 ABS AND HANDBRAKE WARNING LIGHTS BOTH ON
During starting, the "ABS" and "handbrake" warning lights come on simultaneously and stay on for over 4 seconds. (after the initial test on the control unit, both warning lights should go out)|  | The "low brake fluid" and "handbrake on" warning light, it also indicates an EBD function fault if it comes on at the same time as the ABS warning light | 
|  | Under these conditions, the rear wheels may lock and the car may skid when the brakes are operated because the system EBD function is temporarily deactivated. If the warning light comes on by itself, the brake fluid level is low or the handbrake is on. | 
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socketCheck that there are no faults in the ABS control unit. | Continue to Step 2 | An error is detected in the control unit | Continue according to the instructions for the diagnostic equipment | |
| Lack of dialogue with the control unit | Restore the connection between the ABS control unit and the diagnostic connector( See E7020 ABS ). | |||
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |