2891293 - 1076B50 exhaust pipe attachment to engine - r + r

Removing ( Refitting ) Place the car on a ramp.1. Undo the nuts securing the reinforcement brackets on the oil sump and engine central mounting.2. Remove the reinforcement brackets.3. Undo the nuts securing the exhaust pipe to the manifold.4. Undo the bolts securing the pipe to the catalytic converter.5. Release rubber block (5a) from pipe pin (5b).6. Remove the front exhaust pipe section.Recover the exhaust pipe gaskets Refitting ( Removing ) Fit the exhaust pipe gasketsFit the front section of the exhaust pipe.Secure the pin to its rubber block.Tighten the bolts securing the exhaust pipe to the catalytic converter.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	EXHAUST PIPE TO ENGINE	M8	2.4

Tighten the nuts securing the exhaust pipe to the manifold.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST PIPE TO ENGINE	M8	3.2

Tighten the nuts securing the reinforcement brackets to the studs on the oil sump.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST PIPE TO ENGINE	M10 x 1.25	2.8

Tighten the nuts securing the reinforcement brackets to the studs on the engine central mounting.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST PIPE TO ENGINE	M8	2.4