2889257 - E4010 INSTRUMENT PANEL - Description (BLUPOWER)

Description

The gauges and warning lights which form the instrument panel are grouped in a single instrument containing:

• electronic speedometer
• total mileage counter/trip recorder
• digital clock
• methane gauge, with reserve warning light
• warning lights

The speedometer signal comes from the sensor on the gearbox, this signal is 'repeated' for other functions which require the information.The milometer consists of an LCD which alternately shows the total and trip mileage.The clock is digital and is adjusted through the two buttons in the centre/lower part of the instrument marked 'h' and 'min'.The methane level is displayed via electronic circuitry inside the module, which operates the gauge and the warning light (which comes on when the gauge is at about 1/4 of its travel). The inernal logic 'damps' the signal, avoiding fluctuations.The warning lights consist of LEDs built into the electronic circuit, and so cannot be replaced.

The operation of the warning lights which are not included in other functions is illustrated in depth:

• insufficient brake fluid level/handbrake;
• minimum oil pressure;
• brake pad wear warning light

The others are described and illustrated in the diagrams dealing with the components to which they refer:

• direction indicators ( See E2020  DIRECTION INDICATORS / HAZARD WARNING LIGHTS)
• side lights ( See E2010  SIDE LIGHTS / NO. PLATE LIGHTS)
• trailer lights (preparation) ( See E2020  DIRECTION INDICATORS / HAZARD WARNING LIGHTS)
• main beam headlamps ( See E2012  MAIN BEAM HEADLAMPS)
• CODE failure ( See E7010  CODE)
• recharging ( See E5010  STARTING AND RECHARING)
• injection system failure ( See E5030  PETROL ENGINE ELECTRONIC MANAGEMENT)
• engine overheating ( See E5030  PETROL ENGINE ELECTRONIC MANAGEMENT)
• Air Bag failure ( See E7030  AIRBAG)
• passenger Air Bag disabling ( See E7030  AIRBAG)
• ABS failure warning light ( See E7020  ABS)

The instrument is lit up when the ignition is ON and the light is dimmed with the side lights signal.The instrument has direct supply lines and supply lines controlled by the ignition protected by two fuses located in the junction unit.