2892048 - 7005M20 front side door electric window system - r r with door panel/support frame removed
Removing
(
Refitting
)
- 7005A04 front side door water
guard protection - r r or replace with door panel removed - 7005C50 front side door interior opening mechnism r-r for
repair or replacement with door panel removed - 7005E30 object pouch on one front side door r r1. Open the window (1a) about 1/4 of the way, then disconnect the
window safety retainer (1b).2. Disconnect the window from the drive pin.3. Raise the window manually to the closed position; to prevent
it descending accidentally, fit a supporting hook as shown in the
figure.4. Disconnect the electrical connection of the electric window motor. | Name | Connector |
|---|---|---|
| 4 | Front electric window motor left | N60 |
| Name | Connector |
|---|---|---|
| 4 | Front electric window motor right | N61 |
Refitting
(
Removing
)
Check the condition of the
electrically-operated window and ensure the motor is working properly.Refit the electric window unit in the door
frame, fixing it with its nuts.Connect the electrical connection for the
electric window motor.Remove the window support hook.Open the window about 1/4 of the way, then
connect it to the drive pin.Connect the window's safety retainer.Check that the electric window works properly. - 7005E30 object pouch on one front side door r r - 7005C50 front side door interior opening mechnism r-r for
repair or replacement with door panel removed - 7005A04 front side door water guard protection - r r or replace
with door panel removed