2892120 - 7015B18 TAILGATE LOCK STRIKER - R+R
Removing
(
Refitting
)
7040B22 luggage compartment/load
platform moulding - r+r1. Disconnect the operating cable.2. Undo the bolts.3. Remove the striker.
Refitting
(
Removing
)
Check that the striker is undamaged.1. Fit the striker.2. Screw in the retaining bolts without tightening.3. Reconnect the operating cable.4. If necessary, to ensure that the shoes (4a) slide freely, lubricate
them only on the slide pin (4b).5. Use the bolt slots to move the striker into the correct position. Permitted adjustment movements are indicated by arrows.6. Adjust the operating cable using the anchoring grooves on the
end of the sheath.
 | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | TAIL-GATE LOCK STRIKER | M6 | 0.6 - 1.1 |