7045A97 CENTRE FRONT SEAT CUSHION UPHOLSTERY - REPAIRING WITH SEAT REMOVED - Fiat - MULTIPLA - eLearn

2892235 - 7045A97 Centre front seat CUSHION UPHOLSTERY - Repairing with seat removed

) - 7045A45 central front seat guard (1) - r r (right and left) 1. Disconnect the squab control cable (1a) from the retainers (1b).

1. Undo the four bolts securing the cushion to the frame.2. Disengage the cushion cover anchor section.3. Remove the cushion assembly.

1. If necessary, pull the handle and disconnect the cable.2. Disconnect the cable from the retaining clips.3. Remove the cable.

1. Open the squab control lever and, using a screwdriver, disengage the retainers (1a) then remove the lever trim (1b).2. Using a screwdriver, disengage the retainers (2a) and remove the moulding (2b).

1. Remove the cover surround.Start at one end.2. Remove the metal part of the seat.

1. Cut the retainers securing the cover to the padding.2. Remove the cover from the padding.

Reassembling ( Dismantling

) Check that the cushion cover and padding are intact and show no signs of damage.Secure the cover to the padding using the retaining rings.Fit the metal part of the seat and fit the cover surround.Fit the squab control moulding and engage the retainers.Fit the lever trim and engage the retainers.If removed, fit the cable and secure it with the retaining bands.Connect the cable to the handle.Refit the cushion assembly to the frame.Refit the cushion cover anchor section.Mould the cover onto the padding.Tighten the four bolts securing the cushion to the frame.Connect the squab control cable to the retainers. - 7045A45 central front seat guard (1) - r r (right and left)