2891971 - 5580C14 AIR BAG ECU - R+R

Before removing and refitting the control unit, carry out the following preliminary operations:- Place the ignition key in the OFF position and extract it;- Disconnect and insulate the battery leads;- Wait for 10 minutes before continuing.
FOLLOW ALL THE RECOMMENDED SAFETY FULES (     5580C air bag system ).
Removing ( Refitting )     7040L20 tunnel trim - r r . 1. Undo the bolts fixing the duct.2. Move the upper part of the duct (2a) backwards, taking advantage of the cover (2b) area.3. Lift up the edges of the sound insulating carpet.4. Rotate the safety bracket (4a) in the direction of the arrow and disconnect the electrical connection (4b).

NameConnector
4bAir bag control unit    M60
5. Unscrew the nuts.6. Remove the control unit.
Refitting ( Removing ) Follow these precautions.
Do not strike the control unit and do not connect the electrical connection to the control unit before having fixed the control unit correctly. Make sure that the battery is disconnected.
If the control unit is being replaced, remove the removable part of the adhesive label from the new control unit and place it in a special file containing the vehicle details (model, registration date, chassis number) and the serial number of the old control unit. This file should be kept for future checks.
1. Position the control unit (1a).Make sure that the arrow (1b) on the upper surface of the control unit is pointing in the direction of travel.2. Tighten the nuts to the recommended torque.

FasteningComponentØValue(daNm)
2NutAIR BAG CONTROL UNITM60.7 - 1.1
3. Connect the electrical connection (3a) and secure it by rotating the safety bracket (3b) in the direction of the arrow.4. Reposition the edges of the sound insulation carpet.5. Move the top part of the duct (5a) forwards, taking advantage of the cover (5b) area.
Fasten the duct using the bolts.    7040L20 tunnel trim - r r . Connect the battery.Check the operation of the system using the Examiner or another tester.
Before removing and refitting the control unit, carry out the following preliminary operations. Before removing and refitting the Air Bag module, the following preliminary operations must be carried out. - Disconnect the battery leads and insulate. - Wait for 10 minutes before continuing.
FOLLOW ALL THE RECOMMENDED SAFETY FULES (     5580C air bag system ).