2888482 - V01 WATER PENETRATION PASSENGER COMPARTMENT, FRONT AREA

When it is raining or after washing, there is water in the front of the passenger compartment.
Results of the tests
1CHECK THAT THERE IS NO PENETRATION THROUGH THE WINDSCREENAll OKProblems metOperation
Check the sealant on the windscreen See Test   7035A  Check there is no penetration through the fixed windows (windscreen and rearscreen) Continue to Step 2No sealantRenew the sealant, following the instructions Op. 7035A04
2WINDSCREEN CHECKAll OKProblems metOperation

Check the windscreen. In particular, visually inspect:

  • the condition of the window
  • the flatness of the support surface
  • the flatness of the serigraphy
Continue to Step 3Faults in the windscreenReplace the windscreen Op.   7035A18 
3WINDSCREEN BASE COVER CHECKAll OKProblems metOperation

Check the cover at the base of the windscreen In particular, visually inspect

  • the condition of the cover
  • that the cover and the windscreen wiper arm are properly fixed
Continue to Step 4Faults in the coverRenew or replace the cover Op.   7055A18 
4CHECK ON COVER UNDER THE WINDSCREENAll OKProblems metOperation

Check the cover under the windscreen. In particular, visually inspect

  • the condition of the cover
  • that the cover is properly fixed
  • that the main beam headlamps are correctly fixed
Continue to Step 5Faults in the coverRenew or replace the cover Op.   7055A20 
5ENGINE COMPARTMENT BULKHEAD DRAINAGE CHECKAll OKProblems metOperation
Check the drainage of the engine compartment bulkhead.In particular, check for dirt, leaves etc.Continue to Step 6Dirt in drainsClean the drains. If necessary refit correctly
6ENGINE COMPARTMENT BULKHEAD CHECKAll OKProblems metOperation

Check the engine compartment bulkhead. In particular, ascertain:

  • the plugs are fitted
  • the plugs are correctly fitted
  • the rubber cable covers are fitted correctly
  • the sealing is efficient
  • correct assembly
Continue to Step 7Faults in the engine compartment bulkheadRestore the engine compartment bulkhead fitting and fixings
5CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'