2891184 - 1008A44 rear rigid mount - r r

Removing ( Refitting ) Place the car on a ramp.Position a column jack beneath the engine to support it safely.1. Undo the bolts fixing the rigid mount to the reinforcement.2. Unscrew and withdraw retaining bolt (2a). Unscrew retaining nuts (2b).3. Remove the rigid mount from the engine.
Refitting ( Removing ) Position the rigid mount and tighten the nuts retaining it to the gearbox to torque.

FasteningComponentØValue(daNm)
-NutPOWER UNIT RIGID REAR MOUNTM125.5
Insert the bolt into the hole on the mount and tighten to torque.

FasteningComponentØValue(daNm)
-BoltINTERM RUBBER MOUNTM12 x 1.258
Tighten the bolts securing the reinforcement bracket to the rigid engine mount.

FasteningComponentØValue(daNm)
-BoltSTIFFENING REINFORCEMENTM8Support side 2.8
Tighten the bolts securing the reinforcement bracket to the crankcase.

FasteningComponentØValue(daNm)
-BoltSTIFFENING REINFORCEMENTM10Crankcase end 5
Remove the column jack.Remove the vehicle from the ramp.