1080B60 LAMBDA SENSOR - R.R. - Fiat - MULTIPLA - eLearn

2891297 - 1080B60 LAMBDA SENSOR - R.R.

) With the ignition key in the OFF position, disconnect the battery negative terminal.Place the car on a ramp.1. Disconnect the electrical connection for the Lambda sensor.

	Name	Connector
1	Lambda sensor	K40

Release the lambda probe electric cables from the bands on the engine bulkhead.Raise the car.2. Release the lambda probe lead from the bracket.3. Unscrew the lambda probe and remove from the exhuast pipe.

Refitting ( Removing

) Check the condition and electrical continuity of the lambda probe.Screw the lambda probe onto the exhaust pipe. Tighten to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LAMBDA PROBE	M18 x 1.5	4.8

Fit the electrical wiring into its seat.Lower the lift.Connect the electrical connector.Secure the wiring to the bulkhead.Remove the vehicle from the ramp.