2891473 - 1042E60 CNG CANISTER ASSEMBLY SHIELD/PROTECTION / - R.R. (BIPOWER, BLUPOWER)

Removing ( Refitting ) Place the car on a ramp.Disconnect the battery negative terminal.Raise the car.1. Undo the fixing bolts (1a) and recover the washers (1b).2. Remove the metal shield for the CNG canisters. Refitting ( Removing ) Position the shield for the canisters.Screw in and then tighten the bolts fixing the shield to the bodyshell.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BODYSHELL CANISTER SHIELD	M12	4

Screw in and then tighten the bolts fixing the shield to the intermediate crossmember.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	INTERMEDIATE CROSSMEMBER CANISTER SHIELD	M12	3

Screw in and then tighten the bolts fixing the shield to the bushes for the housing on the centre pins securing the canisters.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CENTRE BUSH CANISTER SHIELD	M6	0.8

Lower the ramp.Connect the battery negative terminal.