2891511 - 1043E12 gpl tank guard protection r r (GPOWER)

Removing ( Refitting ) Place the car on a ramp.Disconnect the battery negative terminal.1. Undo the fixing bolts (1a) and recover the washers (1b).2. Remove the LPG tank steel guard.
Refitting ( Removing )
Check the condition of the LPG tank, i.e. that it is totally free of cracks, tears or dents of any kind. If not, replace the guard.
Position the shield for the canisters.Screw in and then tighten the bolts fixing the shield to the bodyshell.

FasteningComponentØValue(daNm)
-BoltLPG TANK PROTECTION/GUARDM12 x 1.25(bodyshell) 4
Screw in and then tighten the bolts fixing the shield to the intermediate crossmember.

FasteningComponentØValue(daNm)
-BoltLPG TANK PROTECTION/GUARDM10(intermediate crossmember) 3
Screw in and then tighten the bolts fixing the shield to the bushes for the housing on the centre pins securing the canisters.

FasteningComponentØValue(daNm)
-BoltLPG TANK PROTECTION/GUARDM6(bodyshell) 0.8
Connect the battery negative terminal.Remove the vehicle from the ramp.