1057B68 GPL INJECTOR UNIT WITH CONNECTION PIPES TO PRESSURE REGULATOR DISMANTLE AND REBUILD AT BENCH (GPOWER) - Fiat - MULTIPLA - eLearn

2891515 - 1057B68 gpl injector unit with connection pipes to pressure regulator dismantle and rebuild at bench (GPOWER)

) 1. Undo bolts (1a) securing the pipe retaining plate.2. Undo LPG delivery and return pipes (2a) and recover sealing rings (2b).3. Withdraw plate (3a) from injector (3b).Carry out the same operation on all the injectors.

Reassembling ( Dismantling

)

Change the sealing rings on all the injector pipes.

1. Push the pipes fully home on the injector, then fit the retaining plate. Check the plate adheres to the injector body over its entire area.Tighten the pipe nuts to the injectors.Tighten the pipe retaining plate bolt.Carry out the same operation for all the injectors.