2892054 - 7005N20 front side door lock motor/catch assembly - rr with door panel and support frame removed

Removing ( Refitting )  - 7005A04  front side door water guard protection - r r or replace with door panel removed - 7005D22  front side door descending window glass guide (one) - r r with door panel (and support frame) removed (rear guide) 1. Disconnect, from the lock side, the linkage connecting to the outer handle.2. Disconnect, from the lock side, the interior opening linkage.3. Undo the bolts (3a) securing the lock and collect the plate (3b).4. Move the lock over slightly.5. Disconnect the electrical connection then withdraw the lock.

NameConnector
5Front door lock gear motor left  N50 

NameConnector
5Front door lock gear motor right  N51 
6. Disconnect the safety device linkage from the lock.
Refitting ( Removing ) Check that the lock is intact and undamaged.Connect the safety device linkage to the lock.Connect the electrical connection to the lock.Fit the lock.Fit the plate and tighten the retaining bolts.

FasteningComponentØValue(daNm)
-BoltFRONT DOOR LOCK MECHANISMM81.8 - 2.7
Connect, on the lock side, the linkage connecting to the outer handle and the interior opening linkage.Check that the lock works by operating the outer handle. - 7005D22  front side door descending window glass guide (one) - r r with door panel (and support frame) removed (rear guide)  - 7005A04  front side door water guard protection - r r or replace with door panel removed