2892149 - 7030B24 sliding roof blind,front or rear - r r

Removing ( Refitting )  - 7045A10  l/h or r/h front seat (one) - r+r (Left and right).  - 7040H30  front pillar trim - r r (Left and right).  - 3380A44  handbrake/linkage protection - r+r - 7040H34  central pillar trim - r r (Left and right).  - 7040H42  rear pillar trim - r r (Left and right).  - 7040G40  load compartment light bulb holder - r r (only when removing rear sun-roof)  - 7040B18  l/h or r/h side trim (one) of luggage compartment/load platform - arrange (left and right side, only when removing rear sliding roof)  - 7040H33  glasses holder (1) lh or rh, on roof trim - r r (Left and right).  - 7065C34  l/h or r/h sun blind (one) - r+r (Left and right).  - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after checking electrical circuit - 7040E50  front modular courtesy light unit - r+r - 7065C30  interior l/h or r/h grab handle (one) - r+r (all)  - 7040E17  lh or rh rear courtesy light - r r (Left and right).  - 7030B32  sliding roof decorative seal(1) front or rear - r r (front and rear)  - 7030B62  sliding roof control switch (1) front rear - r r (front and rear) 1. Undo the bolts on the seat belt cover (only for removal of rear sunroof).2. Remove the cover (only for removal of rear sunroof).3. Remove the seals of the 4 door frames near the ceiling trim.4. Remove the retainers using the appropriate tool (only for removal of rear sunroof).

NameCountry
4Scraper blade1.878.077.000
5. Carefully lower the ceiling trim.
1. Undo the bolts securing the bottom cover.2. Remove the bottom cover.
1. Undo the bolts on one sunblind guide.2. Remove the guide.3. Press the studs (3a) on the winder and disengage them from the mountings (3b).4. Recover the sunblind complete with winder.5. Recover the guide runs.
Refitting ( Removing ) Check that the sunblind and winder are not damaged.Fit the runs on the sunblind guides.Fit the winder and sunblind in its seating, engaging the studs in their mounts.Position the guide and secure with its bolts.Position the bottom cover and secure with the bolts.Check the operation of the sunblind.Position the ceiling trim.Fit the retainers.Fit the seals of the 4 door frames near the ceiling trim.Fit the cover on the central rear seat belt.Tighten the cover bolts. - 7030B62  sliding roof control switch (1) front rear - r r (front and rear)  - 7030B32  sliding roof decorative seal(1) front or rear - r r (front and rear)  - 7040E17  lh or rh rear courtesy light - r r (Left and right).  - 7065C30  interior l/h or r/h grab handle (one) - r+r (all)  - 7040E50  front modular courtesy light unit - r+r - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after checking electrical circuit - 7065C34  l/h or r/h sun blind (one) - r+r (Left and right).  - 7040H33  glasses holder (1) lh or rh, on roof trim - r r (Left and right).  - 7040B18  l/h or r/h side trim (one) of luggage compartment/load platform - arrange (Left and right).  - 7040G40  load compartment light bulb holder - r r - 7040H42  rear pillar trim - r r (Left and right).  - 7040H34  central pillar trim - r r (Left and right).  - 3380A44  handbrake/linkage protection - r+r - 7040H30  front pillar trim - r r (Left and right). - 7050A10 rear seat - r+r (all)  - 7045A10  l/h or r/h front seat (one) - r+r (Left and right). Check that all the parts are fitted correctly and check the operation of removed electrical components.