2892273 - 7065A10 , (One), front SEAT BELT left or right - R.R.

Before removing and refitting the pretensioners, observe all the specified safety regulations (  See subassembly 7065   SEAT BELTS AND ACCESSORIES ).
Removing ( Refitting )  - 7045A10  l/h or r/h front seat (one) - r+r - 3380A44  handbrake/linkage protection - r+r (left only)  - 7040H34  central pillar trim - r r1. Remove the clip (1a) and withdraw the through stud (1b).2. Undo the bolt.3. Remove the seat belt with pretensioner (3a).
When the centring pin (3b) is withdrawn from its seating, the pretensioner is automatically disarmed. Do not tamper with the centring pin.
Place the pretensioner in the special cabinet, resting it on a free surface. Refitting ( Removing )
Handle the pretensioner with extreme care, without tampering with the centring pin.
1. Refit the pretensioner (1a) checking that the centring pin is positioned correctly (1b).
When the centring pin is positioned correctly in its seating, the pretensioner is automatically armed.
2. Tighten the bolt to the specified torque.
Do not use impact tools for tightening.

FasteningComponentØValue(daNm)
2BoltFRONT SEAT BELT PRETENSIONER.-4.0
3. Fit the through stud and fit the clip.
 - 7040H34  central pillar trim - r r - 3380A44  handbrake/linkage protection - r+r (left only)  - 7045A10  l/h or r/h front seat (one) - r+r