2892350 - 1084B14 engine oil pump - r+r with power unit removed
Removing
(
Refitting
)
- 1004D10 power unit (manual gearbox), removed, remove and
re-build - 1004D40 engine - position on stand and remove - 1020A24 crank case oil sump - r + r clean seals for sealant
application with engine removed1. Undo the fixing bolts.2. Remove the engine oil pump (2a) complete with draught device
(2b).3. Recover the oil pump gasket.
Refitting
(
Removing
)
Replace the oil pump gasket.Position the oil pump fitting the drive
shaft in its housing.Tighten the bolts fixing the oil pump to
the cylinder block/crankcase to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | ENGINE OIL PUMP | M6 | 2.5 |