2891276 - 1068A30 accelerator control cable - r + r

Removing ( Refitting ) Open the driver's door.1. Disconnect the throttle cable from its seat on the pedal.2. Disconnect the clip from the cable sheath.Open the bonnet lid.3. Undo bolts (3a) securing bracket (3b).4. Disconnect the accelerator cable from the throttle body.5. Remove the accelerator cable from the engine bay by passing the cable retainer on the accelerator pedal through the hole in the bulkhead. Refitting ( Removing ) Insert the accelerator cable through the hole in the bulkhead until it is close to the pedal.Secure the cable to the accelerator pedal.Secure the cable to its seat in the throttle body.Fit the bracket on the throttle body and secure using the retaining bolts.Secure the accelerator cable to the anchorage bracket using the clip. - 1068A10  accelerator pedal control - check, adjust if necessary and lubricateClose the bonnet lid.Close the front side door.