| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Preliminarily
check the manual operation of the central locking | Continue to Step 1 | Central locking not working,
not even manually | See table P10 |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the diagnostic equipment (Examiner or other instruments) to the
diagnostic socketCheck that there are no faults in the alarm receiver | Continue to Step 2 | Error detected in the
receiver | Continue
according to the instructions for the diagnostic equipment |
| Dialogue failure for diagnostic equipment between the control
unit and the receiver | Restore the connection between the control unit and the
diagnostic connector ( See E7015 ALARM ). |
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |