T01 WIND NOISE FROM THE FRONT DOORS - Fiat - MULTIPLA - eLearn

2888470 - T01 WIND NOISE FROM THE FRONT DOORS

With the vehicle moving, there is noise coming from one of the front doors.

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Firstly check the moving window glass is properly closed.Check that the noise is actually coming from one of the front doors by carrying out the preliminary check for locating noises See Test 70A Location of wind noise (preliminary location)	Continue to Step 1	The wind noise comes from another area	Check the diagnostic table corresponding to the area located.
1	CHECK THE DUST SEALING STRIP ON THE DOOR	All OK	Problems met	Operation
	Check the lower seal is properly fitted	Continue to Step 2	Faulty fitting of seal	Fit the sealing strip correctly Op. 7005A46
2	FRONT DOOR WIND NOISE LOCATION CHECK	All OK	Problems met	Operation
	Carry out the detailed check for locating wind noise from the front doors See Test 7005A Location of front door wind noise and identify the area where the noise is coming from.	No wind noise is locatedContinue to Step 3	The noise persists with the entire door taped	Check for sealant between the wing and the pillar under the wheel arch
			The wind noise is coming from the area between the pillar and the windscreen	Check the condition of the door compartment seal in that area and ensure it is bonded properly to the body Op. 7005A34
			The wind noise comes from the handle	Check the condition of the door compartment seal in that area and ensure it is bonded properly to the body Op. 7005A34
			The wind noise comes from the handle	Check the condition of the handle and make sure it is correctly fitted or replace the handle Op. 7005C11
			The wind noise is coming from the area between the door and the windscreen	Adjust the door hinges Op. 7005A14 .
			The wind noise is coming from the area between the door and the wing	Adjust the door hinges Op. 7005A14
			The wind noise comes from the glass scraper area	Check the glass scraper is undamaged and correctly fitted Op. 7005D26
			The wind noise is coming from the area of the mirror	Check the condition of the fixed window and make sure it is correctly fitted Op. 7005D44
			The wind noise is coming from the area of the mirror	Check the condition of the mirror and make sure it is correctly fitted or replace the actual mirror Op. 7005R30
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'