2891643 - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R.

Removing ( Refitting )  - 1048A10  air cleaner filtering element - replace - 5530B10  battery - r+r - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Drain the brake-clutch fluid from the reservoir using a suitable syringe.1. Undo nuts (1a) and release cable (1b) from the battery positive terminal. 1. Disconnect the comb connector from the A.B.S. hydraulic and electronic control unit.2. Disconnect the hose fittings from the A.B.S. hydraulic and electronic control unit.3. Undo nuts (3a) and remove A.B.S. hydraulic and electronic control unit (3b) together with its mount.

	Name	Connector
1	ABS control unit	M50

Refitting ( Removing ) Fit the mount and A.B.S. hydraulic and electronic control unit in its seat and tighten the nuts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ABS CONTROL UNIT SUPPORT	M8	2.4

Connect the connectors to the hydraulic and electronic control unit and tighten to torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	ABS CONTROL UNIT RIGID FRONT BRAKE PIPES../	M10	1.4

	Fastening	Component	Ø	Value(daNm)
-	Connector	ABS CONTROL UNIT RIGID REAR BRAKE PIPES../	M10	1.4

	Fastening	Component	Ø	Value(daNm)
-	Connector	RIGID BRAKE PIPES TO BRAKE PUMP MASTER CYLINDER.	M10	1.4

	Fastening	Component	Ø	Value(daNm)
-	Connector	RIGID BRAKE PIPES TO BRAKE PUMP MASTER CYLINDER.	M12	1.4

Connect the hydraulic control unit comb connection.

	Name	Connector
-	ABS control unit	M50

Reconnect the battery positive terminal. - 3330A10  BRAKE FLUID - Check level and top up, if necessary. - 3330A14  HYDRAULIC BRAKING SYSTEM - Bleed air - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 5530B10  battery - r+r - 1048A10  air cleaner filtering element - replace