The circuit for the dipped beam headlamps
is operated by the steering column switch unit
H5
.
When the switch is placed in the dipped
headlamps position this energizes the relay
J45
, via the
line controlled by the ignition (INT) protected by fuse
F8
of the junction unit
B1
, which supplies the left and right
headlamps
F10
and
F11
. Each circuit is protected
by a fuse in the junction unit
B1
:
F5
for the right
headlamp and
F4
for the left one.
The supply line for the right lamp - protected
by fuse
F5
- also acts as the go ahead signal for the headlamp
alignment
See E3080 HEADLAMP AGLINMENT CORRECTOR
and the
headlamp washer.
See E3022 HEADLAMP WASHER