The cigar lighter current socket P50 is
supplied to pin 2 from the line for relay R1: the line is controlled
by the ignition INT/A and protected by fuse F15: both are located
in the junction unit B1.
The supply for the relay
R1
comes
from the direct line of the maxifuse
J/B1
of
B5
,
whilst the coil is supplied by the line (INT/A).
Pin 1 for the socket P50 provides the earth.
The ring nut for the current socket is lit
up (at pin 3) with the side lights on by means of the line coming
from the steering column switch unit
H5
switch and is protected
by the fuse
F2
of the junction unit (
See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
).
As far as the other currents sockets P51
and P52 are concerned, they are supplied at pin 2 via the line for
the relay J61. This is supplied by the maxifuse J/B2 line of B5,
whilst the coil is supplied by the line controlled by the ignition
(INT/A) protected by the fuse B27.
The supply for the two current sockets is
then protected by the specific fuse
B15
.