All the operations must be carried
out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving
parts, components at high temperature and live electrical cables. Closely
observe the following precautions when carrying out operations in
the engine compartment:- Turn off the engine and wait for it to
cool down.- Do not smoke.- Do not use naked flames.- Make sure that there is an extinguisher
at hand in the workplace.For some procedures, the use of special
Fiat tools is indicated. The use of these tools is essential in
order to work in safety.Observe the current safety regulations concerning working
in workshops. If necessary, the Manual indicates cases where special
attention is required to avoid dangerous situations occurring. When using chemicals, closely follow the
safety instructions given on the safety sheet which the supplier
must give to the user (in Italy, in accordance with D.M. no. 47/1992).
WARNINGS
All the operations must be carried
out with the utmost attention and care to avoid damaging the components.Avoid brake-clutch fluid coming into contact
with paintwork; if it does, wash immediately with water.Do not reuse brake-clutch fluid drained
during bleeding.To release parts which are firmly stuck
together, tap lightly using an aluminium or lead hammer for ferrous materials,
or a wood or resin hammer for light alloy parts.During dismantling, check that parts which
have to be marked carry the reference marks.During refitting, lubricate the parts as
necessary to prevent seizures during the initial period of operation.During refitting, it is essential to observe
the tightening torques and adjustment data.During refitting operations, replace gaskets,
oil seals, spring washers, safety plates, self-locking nuts and
any worn parts.