1. Undo the bolts.2. Disengage the bracket (2a) from the opening intermediate control
device (2b) and remove it.3. Disconnect the linkage from the lock and save it.
Refitting
(
Removing
)
Check that the linkage and
intermediate control are not damaged.Connect the linkage to the lock.Engage the opening intermediate control
to the bracket, then fit the bracket.Tighten the bolts.Connect the intermediate control to the
end of the linkage.Connect the linkage to the retainer.Fit the intermediate control and tighten
the bolts. - 7005A04 front side door water guard protection - r r or replace
with door panel removedTest to check the interior handle and catch
are working properly.