3025232 - 3330C37 pipe from brake fluid reservoir to master cylinder (pump) - r r for rhd versions

Removing ( Refitting )  - 1016A40  ignition coil cover on cylinder head- r+r - 1008C10  power unit upper reaction link r r - 4130B10  power steering fluid resevoir r r - 1072D22  Air flow switching device control ACTUATOR - R.R. (2.0 engine)1. Undo the brake fluid reservoir cap.2. Using a syringe, drain the brake fluid from the reservoir. 1. Undo the bolts securing the brake fluid reservoir. 2. Lower the reservoir as far as possible so that the fluid in the pipes flows out, then draw off the brake fluid in the reservoir using a syringe. 3. Disconnect the pipe to be removed from the reservoir and use a cloth to collect any brake fluid emerging. 1. Disconnect the pipe (1b) to be removed from the master cylinder and use a cloth to collect any brake fluid emerging. 2. Open bands (2a) and remove pipe (2b) to be removed. Refitting ( Removing ) Check that the pipe from brake fluid reservior to master cylinder are undamaged.Position the pipe and fasten it using the bands.Fit the pipe to the master cylinder.Connect the pipe to the reservoir.Refit the brake fluid reservoir and secure with bolts. - 1072D22  Air flow switching device control ACTUATOR - R.R. (2.0 engine) - 4130B10  power steering fluid resevoir r r - 1008C10  power unit upper reaction link r r - 1016A40  ignition coil cover on cylinder head- r+r - 3330A14  HYDRAULIC BRAKING SYSTEM - Bleed air