3025347 - 4420C12 rear suspension stabiliser bar joint - r+r on vehicle
Removing
(
Refitting
)
Position the vehicle on the
ramp.Proceed with the removal - 4450B11 WHEEL (one) rear - R.R. . 1. Undo the nuts (1a) and remove the rear suspension anti-roll bar
joint (1b).
Refitting
(
Removing
)
Replace the rear suspension
anti-roll bar joint in its seating and tighten the nuts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | REAR ANTI-ROLL BAR PIVOTS | M10 | Anti-roll bar/shock absorber side.) 4.1 ÷ 5.0 |