| | Results of the tests |
| 1 | SELECTOR OPERATION CHECK | All OK | Problems met | Operation |
|---|
| Check
that the Cruise Control contacts work properly in the Set- position: | Continue to Step 2 | Lack of continuity | Replace the steering column
switch unit lever with the Cruise Control lever incoroporated Op. 5580A10 |
| 2 | SUPPLY CHECK | All OK | Problems met | Operation |
|---|
| With
the ignition ON and the Cruise Control ON and at '-', check that
there is a voltage signal from the Cruise Control system to the
engine management control unit: See E5060 CRUISE CONTROL | Continue to Step 3 | No voltage found | Restore the connections: See E5060 CRUISE CONTROL |
| 3 | CORRECT OPERATION CHECK | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | The fault persists: control unit defective | Replace the engine management
control unit Op. 1056B82 Search for the fault starting
from another symptom' |