3022640 - J20 REARSCREEN AND DOOR MIRROR DEFROSTING NOT WORKING
With the ignition on, when the heated rear window button is pressed, neither the rear window nor the door mirrors warm up properly| Results of the tests | ||||
| 1 | CHECKING FUSES | All OK | Problems met | Operation | 
|---|---|---|---|---|
| Check the specific heated rear window and rearview mirror supply fuses on the underfacia junction unit | Continue to Step 2 | Blown fuses | Before changing the part, seek the cause of the problem | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| Connect the equipment (Examiner or Examiner plus) to the diagnostic socket and check: 
 | Continue to Step 3 | There are faults in the control unit. | Continue according to the instructions for the diagnostic equipment. | |
| When the heated rear window switch is operated, the displayed status (ON-OFF) does not change | Replace the climate control unit Op. 5040D15 | |||
| 3 | CHECKING HEATED REAR WINDOW AND MIRROR POWER SUPPLY | All OK | Problems met | Operation | 
| Operating the heated rear window switch, check: 
 | Continue to Step 4 | Power supply is correct | Continue to Step 4 | |
| Power supply not coming through | Continue to Step 5 | |||
| 4 | CHECKING DEMISTING COIL | All OK | Problems met | Operation | 
| Check: 
 | Continue to Step 7 | Rear window heating element broken | Replace the rearscreen Op. 7035B14 | |
| Mirror heating element broken | Replace the mirror(s) Op. 7005R30 | |||
| Earth connections not correct | Restore connections See E3030 HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING | |||
| 5 | CHECK ON HEATED REAR WINDOW | All OK | Problems met | Operation | 
| Verify: 
 | Continue to Step 7 | Heated rear window fault | Replace heated rear window | |
| Heated rear window supply failure | Restore connections See E3030 HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING | |||
| Heated rear window earth failure | Continue to Step 6 | |||
| 6 | CHECK ON UNDERFACIA JUNCTION UNIT | All OK | Problems met | Operation | 
| Verify: 
 | Continue to Step 7 | Underfacia junction unit fault | Replace underfacia junction unit Op. 5505A10 | |
| 7 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | Fault persists | Replace the Body Computer Op. 5505A32 Search for the fault starting from another symptom' | ||