3024751 - 1008A42 gear box left rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with the removal  - 4450B10  Front WHEEL (one) - R.R. (Left side).Proceed with the removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Left side).Position a hydraulic jack under the gearbox.1. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting.2. Undo the bolts (2a) and (2b) and remov the power unit gearbox side rigid support (2c).
Refitting ( Removing ) 1. Refit the gearbox side power unit rigid support (1a) in its seating and secure to the gearbox by tightening screws (1b) and bolts (1c) to the specified torque.

FasteningComponentØValue(daNm)
1bBoltPOWER UNIT GEAR BOX END RIGID MOUNTM10(Manual gearbox/differential side) 4.5 ÷ 5.5

FasteningComponentØValue(daNm)
1cBoltPOWER UNIT GEAR BOX END RIGID MOUNTM10(Manual gearbox/differential side) 4.5 ÷ 5.5
2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

FasteningComponentØValue(daNm)
2BoltPOWER UNIT GEAR BOX END RIGID MOUNTM10(Flexible mounting side) 4.2 ÷ 5.1
Remove the hydraulic jack from under the gearbox.Proceed with the refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Left side).Proceed with the refitting  - 4450B10  Front WHEEL (one) - R.R. (Left side).Remove the car from the ramp.