3024757 - 1008B30 gearbox side mount flexible block - replace

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with the removal  - 4450B10  Front WHEEL (one) - R.R. (Left side).Proceed with the removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Left side).Position a hydraulic jack under the gearbox.1. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting.Lower the hydraulic jack as necessary.2. Undo the bolts (2a) and remove the gearbox side support flexible mounting (2b).
Refitting ( Removing ) 1. Place the gearbox side support flexible mounting (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltGEARBOX SIDE RUBBER MOUNTM8(Bodyshell side) 3.2 ÷ 3.9
Using the hydraulic jack, place the gearbox side rigid support in contact with the flexible mounting.2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

FasteningComponentØValue(daNm)
2BoltPOWER UNIT GEAR BOX END RIGID MOUNTM12(Flexible mounting side) 7.9 ÷ 9.7
Remove the hydraulic jack from under the gearbox.Proceed with the refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Left side).Proceed with the refitting  - 4450B10  Front WHEEL (one) - R.R. (Left side).Remove the car from the ramp.