3025503 - 5510C26 rpm sensor - r+r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

NameConnector
-Battery  A1B 
Proceed with the removal  - 1072C44  exhaust manifold heat shield on bulkhead - r+r . Release the electrical wiring for the engine rpm sensor from the fastenings on the modular intake manifold.1. Undo the bolt (1a) and remove the engine rpm sensor (1b).
Refitting ( Removing ) Place the engine rpm sensor back in its housing and secure it by tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
--RPM SENSORM6(Crankase side) 0.9
Secure the electrical wiring for the engine rpm sensor to the fastenings on the modular intake manifold. Proceed with the refitting  - 1072C44  exhaust manifold heat shield on bulkhead - r+r .Connect the electrical connection for the engine rpm sensor.Connect the battery terminal (-).Remove the car from the ramp.