3024792 - 1032B44 toothed drive pulley - r + r with timing belt removed

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the stop OFF, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Refitting ( Removing ) Place the drive pulley back in its housing and secure it tightening the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt with left hand thread	TOOTHED DRIVE PULLEY	M16	(Crankshaft side) 20.9 ÷ 23.1

Remove the flywheel lock.

	Name	Country
-	Counter-torque	1.860.898.000

Place the cover back in its housing and secure it using the bolts.Connect the battery terminal (-).Remove the car from the ramp.