3025114 - 1820B46 RIGID supply PIPE from (pump) - master cylinder R.R .
Removing
(
Refitting
)
Position the vehicle on the
ramp. - 4450B02 left front wheel r r .Remove the protective cap for the bleed
valve on the left front brake caliper.Connect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake-clutch
fluid reservoir is empty.1. Remove the split pin (1a) and axially extract the connector for
the rigid supply pipe from the master cylinder (1b), master cylinder
side.2. Undo the intermediate connector for the rigid supply pipe from
the master cylinder, vibration damper side.3. Remove the rigid supply pipe from the master cylinder.
Refitting
(
Removing
)
Place the rigid supply pipe
from the master cylinder back in its housing.Tighten the intermediate connector for
the rigid supply pipe from the master cylinder, vibration damper
side, to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID DELIVERY PIPE FROM MASTER CYLINDER | M12 | (Vibration damper side) 1.7÷1.9 |