3025304 - 4130B54 return pipe from heat exchanger pipe to power steering fluid resevior r r
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 1008C10 power unit upper reaction
link r r . Proceed with removal - 1008C16 body link bracket - r
r . Remove the power steering fluid reservoir
and drain the fluid using a suitable syringe.1. Disconnect the return pipe from the heat exchanger to the power
steering fluid reservoir, reservoir side.
Refitting
(
Removing
)
Refit in its seating the return pipe from
the heat exchanger to the power steering fluid reservoir.Secure the power steering system pipes
to the fastening on the front suspension beam.Refit the power steering pipe mounting
bracket in its seating and secure with the nut.Connect the rapid attachment coupling on
the return pipe from the heat exchanger to the power steering fluid
reservoir, heat exchanger side.Connect the quick-release fitting on the
return pipe from power steering box to heat exchanger, heat exchanger
side.
Proceed with the refitting - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. (Right
side).Proceed with the refitting - 4450B10 Front WHEEL (one) -
R.R. (Right side).Connect the return pipe from the heat exchanger
to the power steering fluid reservoir, reservoir side.Proceed with refitting - 1008C16 body link bracket - r
r .Proceed with refitting - 1008C10 power unit upper reaction
link r r .Fill the power steering circuit with the
recommended fluid. | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Oli [l] | POWER ASSISTED STEERING CIRCUIT | TUTELA GI/A | 1.2 |