3025345 - 4420C10 rear suspension stabilizer bar - r+r
Removing
(
Refitting
)
Position the vehicle on the
ramp.1. Undo the nuts securing the rear suspension anti-roll bar joints
to the antiroll bar.2. Undo bolts (2a) and remove rear suspension antiroll bar (2b)
complete with mounting blocks (2c).
Refitting
(
Removing
)
1. Refit rear suspension antiroll bar (1a), complete with mounting
blocks, and secure it by tightening the bolts (1b) to the recommended
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | REAR ANTI-ROLL BAR | M8 | (Rear suspension crossmember side) 3.6 ÷ 4.4 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2 | Nut | REAR ANTI-ROLL BAR PIVOTS | M10 | (Anti-roll bar side) 4.1 ÷ 5.0 |
