3026085 - Introduction - FUEL TANK AND PIPES
CONSTRUCTION FEATURES
The fuel system is of the 'returnless' type,
i.e. with only one connecting pipe between the fuel tank and engine.This makes it posible:
- to minimize the possibility of the vehicle catching
fire in the event of an accident
- to reduce fuel vapour emissions into the atmosphere.
The fuel tank, located in front of the rear
axle, is made from a plastic material with high mechanical resistance.The electric fuel pump is contained
in the casing which also incorpotates the:
- fuel pressure regulator
- fuel gauge sender unit
- fuel filter.
The system is equipped with an inertia switch
which, in the case of an impact to the vehicle, cuts off the supply
from the electric fuel pump.1 - Fuel tank
2 - Immersed pump unit complete with fuel gauge sender unit
3 - Fuel filler pipe
4 - Fuel manifold pipe
5 - Fuel injectors Characteristic
of working principle1056
PETROL INJECTION SYSTEM
6 - Fuel vapour separator
Characteristic of working principle
1080 EXHAUST EMISSION CONTROL SYSTEM
7 - Float valves Characteristic
of working principle1080
EXHAUST EMISSION CONTROL SYSTEM
8 - Active charcoal filter
Characteristic of working principle
1080 EXHAUST EMISSION CONTROL SYSTEM
9 - Returnless fuel system
