3025302 - 4130B49 return pipe from power steering case to heat exchanger pipe r r
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 5530B10 battery - r+r .Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT
- R.R. .Remove the power steering fluid reservoir
and drain the fluid using a suitable syringe.1. Undo the connector (1a) and disconnect the return pipe from power
steering box to heat exchanger (1b), power steering box side.2. Release the return pipe from power steering box to heat exchanger
from the retaining band on the power steering box.
Refitting
(
Removing
)
Refit the return pipe from power steering
box to heat exchanger in its seating.Connect the quick-release fitting on the
return pipe from power steering box to heat exchanger, heat exchanger
side.Refit the power steering pipe mounting
bracket in its seating and secure with the nut.Fix the return pipe from power steering
box to heat exchanger to the band on the front suspension beam.Secure the return pipe from power steering
box to heat exchanger to the retaining band on the power steering box.Proceed with the refitting - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. (Right
side).Proceed with the refitting - 4450B10 Front WHEEL (one) -
R.R. (Right side).
1. Connect the return pipe from power steering box to heat exchanger
(1a), power steering box side, and tighten the connector (1b) to
the specified torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Connector | PIPE FROM POWER STEERING BOX/EXCHANGER | M12 | (Power steering box side) 2.7 ÷ 3.3 |
 | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Oli [l] | POWER ASSISTED STEERING CIRCUIT | TUTELA GI/A | 1.2 |