3025089 - 1060G70 vacum tank for controlling engine air intake r r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 7025A12  Engine front sound insulation COVER - R.R. .Proceed with removal  - 7025A14  Bonnet LID - R.R. .Proceed with removal  - 1016A10  sound-proofing cover - r + r .Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 1044B10  fuel filter assembly - r + r or replace .Proceed with removal  - 1080D34  engine oil vapour separator - r + r .1. At the bench, undo the nuts (1a) and remove the vacuum reservoir (1b) complete with solenoid valve (1c) and pipes from the mounting bracket.
Refitting ( Removing ) Place the vacuum reservoir mounting bracket complete with solenoid valve and pipes back in its housing and secure it using the nuts.Proceed with refitting  - 1080D34  engine oil vapour separator - r + r .Proceed with refitting  - 1044B10  fuel filter assembly - r + r or replace .Proceed with refitting  - 7055B54  under-engine guard - r r .Connect the negative (-) battery terminal.Proceed with refitting  - 1016A10  sound-proofing cover - r + r .Proceed with refitting  - 7025A14  Bonnet LID - R.R. .Proceed with refitting  - 7025A12  Engine front sound insulation COVER - R.R. .Remove the car from the ramps.