3024765 - 1016A20 single cam cover - r + r and replace gasket

Removing ( Refitting ) Proceed with the removal  - 1016A40  ignition coil cover on cylinder head- r+r . Proceed with the removal  - 5510C14  ignition coil/s - r+r . 1. Disconnect the oil vapour recirculation pipes from the single tappet cover. 1. Undo the bolts (1a) and remove the single tappet cover (1b) complete with gasket. Refitting ( Removing ) Place the single tappet cover, complete with a new gasket, back in its housing and secure it by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAM COVER	M6	(Cylinder head side) 0.8 ÷ 1.0

Connect the oil vapour recirculation pipes to the single appet cover.Proceed with the refitting  - 5510C14  ignition coil/s - r+r .Proceed with the refitting  - 1016A40  ignition coil cover on cylinder head- r+r .