4130B10 POWER STEERING FLUID RESEVOIR R R - Alfa - 147 - eLearn

3025293 - 4130B10 power steering fluid resevoir r r

) Proceed with removal - 1016A40 ignition coil cover on cylinder head- r+r .Proceed with removal - 1008C10 power unit upper reaction link r r .Remove the power steering fluid reservoir and drain the fluid using a suitable syringe.1. Undo the bolts securing the power steering fluid reservoir.

1. Disconnect the inlet and outlet hoses (1a), then remove the power steering fluid reservoir (1b).

Refitting ( Removing

) Reift the power steering fluid reservoir and connect the fluid inlet and outlet pipes.Tighten the power steering fluid reservoir bolts.Proceed with refitting - 1008C10 power unit upper reaction link r r .Proceed with refitting - 1016A40 ignition coil cover on cylinder head- r+r .Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Oli [l]	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	1.2

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.Position the vehicle on the ground and start up the engine.Carry out 4 - 5 complete steering wheel rotation cycles (right and left).Top up the fluid level in the reservoir.