3025418 - 5040A50 pipe from compressor to air conditioner condenser - r+r

Follow the safety instructions ( See subassembly 5040   AIR CONDITIONING CASING AND COMPONENTS ).
Removing ( Refitting ) Drain the coolant ( - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling ). - 7055B54  under-engine guard - r r - 7210E10  R.R. FRONT BUMPER1. Undo the bolt fixing the pipe to the condenser.2. Disconnect the pipe connector.
Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system.
1. Undo the bolt fixing the pipe to the compressor.2. Disconnect the nut fixing the intermediate coupling.3. Disconnect the pipe connectors.
Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system.
4. Recover the pipe.
Refitting ( Removing ) Check that the pipe is not damaged or cracked.Reposition the pipe.
Replace the O-rings for the connectors.
Only use green coloured seals, resistant to R134A coolant fluid.
Lubricate the thread of the connectors using anti-freeze.
Connect the pipe connectors and tighten the bolts and the nut.

FasteningComponentØValue(daNm)
-BoltCOOLANT SYSTEM FITTINGSM60.9

FasteningComponentØValue(daNm)
-NutCOOLANT SYSTEM FITTINGSM60.9
 - 7210E10  R.R. FRONT BUMPER - 7055B54  under-engine guard - r rRepressurize using coolant fluid ( - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling ).