3024996 - 1084C36 Engine oil cooling RADIATOR mounting BRACKET - R.R.
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard -
r r .Proceed with removal - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. .Proceed with removal - 7055B42 Additional FRONT WHEEL
ARCH (one), left or right - R.R. .Proceed with removal - 7210E10 R.R. FRONT BUMPER .Proceed with removal - 1084C40 Air DUCT for engine
oil cooling radiator - R.R . .Proceed with removal - 1084C34 engine oil cooling radiator
- r + r .1. Position a hydraulic jack under the rigid power unit support,
timing side.2. Undo the bolt securing timing side rigid engine support to the
flexible mounting.Lower the hydraulic jack as necessary.3. Undo the bolts (3a) and remove the flexible block for the propulsion
unit front support.4. Keep the engine oil cooling radiator mounting bracket.
Refitting
(
Removing
)
1. Place the engine oil cooling radiator mounting bracket back in
its housing.2. Place the flexible mounting for the power unit front support
(2a) back in its housing and secure it by tightening the bolts (2b)
to the recommended torque. | The bolts fixing the flexible mounting to the bodyshell also secure the engine oil cooling radiator mounting bracket. |
 | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2b | Bolt | FRONT RUBBER MOUNTS | M8 | (Bodyshell side) 3.2 ÷ 3.9 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 3 | Bolt | ENGINE MOUNT TIMING SIDE | M12 | (Flexible mounting side) 7.9 ÷ 9.7 |
